Room Control Unit 8 IN 8 Out
Price On Enquiry
100 in stock
Vamsi enterprises reserves the right to make any changes in the design and the data without any prior notice.
The image depicted in the catalogue may vary from the actual product.
- Reviews (0)
- Important Features
- Technical Details
This device is a product of the TIS system. It is a DIN-rail mountable device with 8 independent free voltage Relay channels with 1 channel include 0-10 Volte output to for dimming beside the 8 digital inputs which can be controlled separately with TIS protocol messages, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Basic Manual Programming can be done without the software. Advanced Programming knowledge about software obtained in the advanced training courses.
- Can be used for FCU Fan speed, lighting or shutter.
- Can Be programmed manually with TIS panels.
- Economic Cost suitable for residential and offices Project.
- Low Noise and Fast Relay Switch.
- LED for network life and for each channel indicator .
- Working with TIS bus protocol
- ABS anti-flame case.
- UL USA certified relay, terminal, ICs and PCB.
- Product CE certified.
Room Control Unit 8 IN 8 Out
|Outputs||Number of channels|
Nominal current per channel
Maximum total channels load
0 – 230 V AC 50/60 Hz
Ch1 20A, Ch 2-8 10 A / 230 VAC
90 A / 230 VAC
Ch8 include 0-10V output for dimming
|Output switching current||Max switching current|
Max Continues current
Max. switching Voltage:
|16A/230 VAC Resistive |
8 A/230 VAC florescent
440VAC / 125VDC
|Output service life||Mechanical service life||> 10,000,000 Times|
|Output switching time||Operating time |
Max. operating frequency
|15mS (at nomi. Volt) |
8 mS (at nomi. Volt)
|TIS Bus||Number of devices on 1 line |
Current consumption (Normal)
Current consumption ( Peak) Protection
|Max. 64 |
12-32 V DC
<15 mA / 24 V DC
< 140 mA / 24 V DC
Rever se Polarity Protection
|Reaction time||approx. 20ms|
|Operating and display elements||Programming button/LED |
1 -12 buttons
By TIS bus
|For assignment of the physical address |
Manually ON/OFF and Programming
TIS Protocol massages and commands
Manual basic Prog, or by sof tware.
1 X mini USB for up to date upgrading.
|Mounting||Din Rail |
|Standard 35 mm Din rail |
screw holder on the back of the module
|Connection terminal||Load and Power |
Data / bus
|Screw terminal 0,25…4mm2 |
Male female connector s Link + screw Terminal
|Functions||Lighting control ON/OFF Dimming|
Fan speed control
8 Digital inputs
|8 channel controlled separately|
Can set 4 group of curtain (open/close) option
Can set 2 group of Fan (low, med, high) option
Ch 8 used with 0-10V output for dimming
12 different scenarios
Programmable inputs to connect to normal wall
switches and sensors
|Weight||Without packaging||0.45 KG|
|Dimensions||Width x length x height||91mm x 145mm x 75mm|
Cas ing color
|ABS anti fire|
|Air humidity||<85% non-condensing|